BEGIN:VCALENDAR
VERSION:2.0
PRODID:icalendar-ruby
CALSCALE:GREGORIAN
X-WR-CALNAME:PAID EEG Research Study
X-WR-TIMEZONE:Central Time (US & Canada)
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511486856
DTSTART;VALUE=DATE:20221103
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511488905
DTSTART;VALUE=DATE:20221104
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511490954
DTSTART;VALUE=DATE:20221105
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511493003
DTSTART;VALUE=DATE:20221106
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511495052
DTSTART;VALUE=DATE:20221107
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511496077
DTSTART;VALUE=DATE:20221108
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511498126
DTSTART;VALUE=DATE:20221109
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511500175
DTSTART;VALUE=DATE:20221110
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511502224
DTSTART;VALUE=DATE:20221111
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511504273
DTSTART;VALUE=DATE:20221112
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511506322
DTSTART;VALUE=DATE:20221113
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511508371
DTSTART;VALUE=DATE:20221114
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511511444
DTSTART;VALUE=DATE:20221115
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511513493
DTSTART;VALUE=DATE:20221116
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511515542
DTSTART;VALUE=DATE:20221117
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511517591
DTSTART;VALUE=DATE:20221118
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511519640
DTSTART;VALUE=DATE:20221119
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511521689
DTSTART;VALUE=DATE:20221120
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511523738
DTSTART;VALUE=DATE:20221121
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511525787
DTSTART;VALUE=DATE:20221122
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511527836
DTSTART;VALUE=DATE:20221123
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511529885
DTSTART;VALUE=DATE:20221124
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511531934
DTSTART;VALUE=DATE:20221125
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511533983
DTSTART;VALUE=DATE:20221126
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511536032
DTSTART;VALUE=DATE:20221127
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511538081
DTSTART;VALUE=DATE:20221128
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511539106
DTSTART;VALUE=DATE:20221129
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511541155
DTSTART;VALUE=DATE:20221130
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511543204
DTSTART;VALUE=DATE:20221201
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511545253
DTSTART;VALUE=DATE:20221202
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511547302
DTSTART;VALUE=DATE:20221203
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511549351
DTSTART;VALUE=DATE:20221204
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511550376
DTSTART;VALUE=DATE:20221205
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511552425
DTSTART;VALUE=DATE:20221206
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511554474
DTSTART;VALUE=DATE:20221207
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511555499
DTSTART;VALUE=DATE:20221208
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511557548
DTSTART;VALUE=DATE:20221209
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511559597
DTSTART;VALUE=DATE:20221210
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511561646
DTSTART;VALUE=DATE:20221211
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
BEGIN:VEVENT
DTSTAMP:20261008T075602Z
UID:tag:localist.com\,2008:EventInstance_41476511563695
DTSTART;VALUE=DATE:20221212
DESCRIPTION:Hello Everyone\,\nAre you excited about Neurotech Wearables? No
 w might be an excellent time to get a glimpse!!\n\nYou are invited to part
 icipate in a study evaluating the efficacy of the 3D printed electrodes fo
 r the electroencephalography (EEG) monitoring system developed in our grou
 p and monitor brain signals under dynamic states in laboratory setups. You
 r participation in the study will contribute to the development of the nex
 t-generation EEG monitoring system that consists of thin\, soft\, conforma
 l\, and dry electrodes\, printed directly on the human skin via a 3D print
 er. The study is being conducted in Prof. Nanshu Lu’s lab in the Departm
 ent of Aerospace Engineering and Engineering Mechanics of The University o
 f Texas at Austin\, 2501 Speedway\, EER 7.612\, Austin\,\nTX 78712\, 1-512
 -471-4208\, nanshulu@utexas.edu.\n\nThis research study has been approved 
 by The University of Texas at Austin Institutional Review Board. The exper
 iment of validating the printed EEG monitoring system will take approximat
 ely 7-8 hours and may repeat the same activity for 2-3 more days. You will
  be instructed to have a buzz haircut (3 mm clipper size) since we will pr
 int the electrodes directly on the scalp. All the EEG measurements will be
  conducted through a commercial Liveamp module (Brainvision).\nCompensatio
 n will be given to all participants.\n\nIf you are an 18 to 45 years old h
 ealthy adult currently enrolled as a student at the University of Texas at
  Austin and would like more information about participating\, please fill 
 out the form or contact Pukar Maharjan at 512-767-4766 or pukar@utexas.edu
  to obtain the “Consent for Participation in Research”.\n\nLocation: E
 ngineering Education and Research Center (EERC)\n\nPS: Parking is not prov
 ided
GEO:30.288012;-97.73515
LOCATION:Engineering Education and Research Center (EER)
SUMMARY:PAID EEG Research Study
URL;VALUE=URI:https://calendar.utexas.edu/event/paid_eeg_research_study
END:VEVENT
END:VCALENDAR